SN74F573DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 8.6 ns |
| Family | F/FAST |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Power Supply Current-Max (ICC) | 55mA |
| Independent Circuits | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74F573DWG4 Overview
A package called SOIC contains it. As a result, it has a packaging of Rail/Tube. There are 8 bits in this electronic part. This device is designed with 20 terminations. With the supply voltage set at 5V, it is able to operate. With 20 pins, it is equipped. In terms of electronic devices, this one is in the F/FAST family. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. The device is powered by 5V power supplies. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 8 circuits are used to achieve superior flexibility. In addition to that, it is also characterized by BROADSIDE VERSION OF 373. A maximal power current (ICC) is generated for its operation at 55mA. It has been set to 24mA for the low level output current. -3mA is the high level output current. The operating temperature should be lower than 70°C. It is recommended that the operating temperature be higher than 0°C. It supports the maximal supply voltage of 5.5V. This device requires a minimum voltage of 4.5V. As far as the logic IC is concerned, it uses BUS DRIVER. As the output current is 24mA, the design flexibility is maximum.
SN74F573DWG4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74F573DWG4 Applications
There are a lot of Texas Instruments SN74F573DWG4 Latches applications.
- Clocks
- Serial Output Data Queuing
- Lamp and Display (LED)
- Hammer
- Instrumentation
- Sample and hold register
- Multistage ripple counting
- Display driver
- Parallel data storage
- Control circuits
