SN74F74D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74F74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 145MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 3 ns |
| Family | F/FAST |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F74D Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). Package Tubeembeds it. As configured, the output uses Differential. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis required for its operation. Currently, the operating temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. The 74Fseries comprises this type of FPGA. There should be no greater frequency than 145MHzon its output. Despite external influences, it consumes 16mAof quiescent current. There are 14 terminations,You can search similar parts based on 74F74. The power source is powered by 5V. A device of this type belongs to the family of F/FAST. There is an electronic component mounted in the way of Surface Mount. There are 14pins on it. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. In order for the device to operate, it requires 5V power supplies. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It offers maximum design flexibility with its output current of 20mA. It has 3 output lines to operate. A total of 2 channels are available.
SN74F74D Features
Tube package
74F series
14 pins
5V power supplies
SN74F74D Applications
There are a lot of Texas Instruments SN74F74D Flip Flops applications.
- Divide a clock signal by 2 or 4
- Parallel data storage
- Event Detectors
- Safety Clamp
- Memory
- Set-reset capability
- Buffered Clock
- Registers
- Latch
- ESD performance
