SN74F74DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74F74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 145MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 3 ns |
| Family | F/FAST |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F74DG4 Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tubepackage. There is a Differentialoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A supply voltage of 4.5V~5.5V is required for operation. In this case, the operating temperature is 0°C~70°C TA. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74Fseries of FPGAs. Its output frequency should not exceed 145MHz. It consumes 16mA of quiescent There are 14 terminations,The 74F74 family contains this object. Power is supplied from a voltage of 5V volts. It is a member of the F/FASTfamily of D flip flop. Electronic part Surface Mountis mounted in the way. 14pins are included in its design. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. 2 circuits are used to achieve its superior flexibility. There are 5V power supplies attached to it. If high efficiency is desired, the supply voltage should be kept at 5V. As a result of its output current of 20mA, it is very flexible in terms of design. It operates with 3 output lines.
SN74F74DG4 Features
Tube package
74F series
14 pins
5V power supplies
SN74F74DG4 Applications
There are a lot of Texas Instruments SN74F74DG4 Flip Flops applications.
- Circuit Design
- Storage Registers
- Power down protection
- Buffered Clock
- Frequency Divider circuits
- Parallel data storage
- Control circuits
- Automotive
- Dynamic threshold performance
- Single Up Count-Control Line
