SN74F74DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74F74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 145MHz |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 3 ns |
| Family | F/FAST |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F74DR Overview
It is embeded in 14-SOIC (0.154, 3.90mm Width) case. Package Tape & Reel (TR)embeds it. In the configuration, Differentialis used as the output. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of 0°C~70°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74F series. It should not exceed 145MHzin terms of its output frequency. T flip flop consumes 16mA quiescent energy. A total of 14terminations have been recorded. If you search by 74F74, you will find similar parts. A voltage of 5V provides power to the D latch. It is a member of the F/FASTfamily of D flip flop. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. 2 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TR based on its reliable performance. The system runs on a power supply of 5V watts. For high efficiency, the supply voltage should be kept at 5V. With an output current of 20mA, it is possible to design the device in any way you want. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
SN74F74DR Features
Tape & Reel (TR) package
74F series
14 pins
5V power supplies
SN74F74DR Applications
There are a lot of Texas Instruments SN74F74DR Flip Flops applications.
- Differential Individual
- Buffer registers
- Test & Measurement
- Convert a momentary switch to a toggle switch
- ATE
- EMI reduction circuitry
- QML qualified product
- Functionally equivalent to the MC10/100EL29
- Frequency Dividers
- Single Up Count-Control Line
