SN74F74DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74F74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 145MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 3 ns |
| Family | F/FAST |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F74DRG4 Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. There is a Differentialoutput configured with it. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74Fseries contain this type of chip. Its output frequency should not exceed 145MHz Hz. It consumes 16mA of quiescent In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74F74. The power source is powered by 5V. A device of this type belongs to the family of F/FAST. In this case, the electronic component is mounted in the way of Surface Mount. This board has 14 pins. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. 2 circuits are used to achieve its superior flexibility. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The power supply is 5V. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. As a result of its output current of 20mA, it is very flexible in terms of design. It operates with 3 output lines.
SN74F74DRG4 Features
Tape & Reel (TR) package
74F series
14 pins
5V power supplies
SN74F74DRG4 Applications
There are a lot of Texas Instruments SN74F74DRG4 Flip Flops applications.
- Differential Individual
- Circuit Design
- Individual Asynchronous Resets
- Latch-up performance
- Modulo – n – counter
- Event Detectors
- Memory
- Asynchronous counter
- Computers
- Latch
