SN74F74NSRG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 145MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Current - Output | 20mA |
| Number of Bits | 1 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 3 ns |
| Family | F/FAST |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74F74NSRG4 Overview
As a result, it is packaged as SOP. There is an embedded version in the package Tape & Reel (TR). T flip flop uses TTLas the output. A total of 2 elements are present. The number of terminations is 14. The D flip flop is powered by a voltage of 5V . The electronic device belongs to the F/FASTfamily. Electronic part Surface Mountis mounted in the way. There are 14pins on it. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with 1bits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. It runs on 5Vvolts of power. If high efficiency is desired, the supply voltage should be kept at 5V. This input has 1lines in it. A -1mAis set for the high level output current. It is set to 20mAfor low level output current. Ideally, the operating temperature should be lower than 70°C. It is recommended that the operating temperature is higher than 0°C. The system operates with a minimum supply voltage of 4.5V. It supports the maximal supply voltage of 5.5V. It is possible to obtain a frequency of 145MHz. D FLIP-FLOPis the logic IC it uses. A total of 2 functions are available on the T flip flop. It is equipped with 14 pins. It features maximum design flexibility due to the 20mA output current.
SN74F74NSRG4 Features
Tape & Reel (TR) package
14 pins
1 Bits
5V power supplies
2 Functions
14 pin count
SN74F74NSRG4 Applications
There are a lot of Texas Instruments SN74F74NSRG4 Flip Flops applications.
- Balanced Propagation Delays
- QML qualified product
- Counters
- Set-reset capability
- Convert a momentary switch to a toggle switch
- Memory
- Cold spare funcion
- Dynamic threshold performance
- Digital electronics systems
- Bus hold
