SN74FB1651PCAG4
| Parameters | |
|---|---|
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 3 |
| Current - Output | 100mA |
| Number of Bits | 17 |
| Propagation Delay | 13.4 ns |
| Family | FB |
| Logic Function | Buffer, Clock, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | OPEN-COLLECTOR/3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.1 A |
| Prop. Delay@Nom-Sup | 8.9 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | -3mA |
| Low Level Output Current | 100mA |
| Control Type | INDEPENDENT CONTROL |
| Translation | BTL & TTL |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 100 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
SN74FB1651PCAG4 Overview
The LQFP package contains it.Due to its superior flexibility, it uses 2 circuits.As part of the transmission line termination process, there are a total of 100 terminations.A supply voltage of 5V powers it.A total of 100 pins are included.Level translators has 100 pins.Electronic parts with 17 bits are designed for this application.There is a maximum voltage of 5.5V supported.There is a minimum supply voltage of 4.5V for it.This mount is done using the method of Surface Mount.Bus Driver/Transceivers contains this part.Level translators uses the logic IC REGISTERED BUS TRANSCEIVER.Typically, 3 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.This electronic device belongs to the family of FB.This device runs on a 5V power supply.Level translators is recommended that the operating temperature be higher than 0°C.A temperature below 70°C should be used for operation.Because it features 100mA output current, maximum design flexibility can be achieved.
SN74FB1651PCAG4 Features
LQFP package
2 circuits
100 pin count
100 pins
5V power supplies
SN74FB1651PCAG4 Applications
There are a lot of Texas Instruments SN74FB1651PCAG4 voltage translators & level shifters applications.
- One Fabrication Site
- Data and Clock Transmission Over Backplane
- Electronic Points of Sale
- Routers (routing equipment)
- Handset
- Driving indicator LEDs or buzzers
- Enterprise
- Power-sensitive applications
- One Assembly and Test Site
- MDIO
