SN74FB1653PCAG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 100 |
| Polarity | Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Current - Output | 100mA |
| Number of Bits | 17 |
| Propagation Delay | 15.4 ns |
| Family | F/FAST |
| Logic Function | Buffer, Clock, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | OPEN-COLLECTOR/3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.1 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | -3mA |
| Low Level Output Current | 100mA |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 145mA |
| Translation | BTL & LVTTL |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74FB1653PCAG4 Overview
The LQFP package contains it.The circuit's superior flexibility is achieved through the use of 2 circuits.0 terminations are used to end transmission lines.In order for it to operate, it needs to be powered by a voltage of 5V.The pin count of this device is 100.There are 100 pins on it.There are 17 bits in this electronic part.Supports a voltage of 5.5V as its maximum supply voltage.The minimal voltage for operation is 4.5V.Surface Mount is used for mounting.In Bus Driver/Transceivers, this part is included.Logic ICs it uses are of the REGISTERED BUS TRANSCEIVER type.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.In terms of electronic devices, this one is in the F/FAST family.A 3.35V power supply powers it.Temperatures above 0°C are recommended.A temperature below 70°C should be used for operation.This device features maximum design flexibility due to its output current of 100mA.
SN74FB1653PCAG4 Features
LQFP package
2 circuits
100 pin count
100 pins
3.35V power supplies
SN74FB1653PCAG4 Applications
There are a lot of Texas Instruments SN74FB1653PCAG4 voltage translators & level shifters applications.
- GPIO
- One Fabrication Site
- Industrial Equipment
- Driving Indicator LEDs or Buzzers
- Desktop PC
- One Assembly and Test Site
- Tablet PCs
- Motor Drives
- Telecommunications
- Advanced Driver Assistance System (ADAS)
