SN74GTL1655DGGRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 64 |
| Weight | 262.601633mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 64 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 160MHz |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of Ports | 2 |
| Nominal Supply Current | 5mA |
| Current - Output | 100mA |
| Number of Bits | 16 |
| Propagation Delay | 6.7 ns |
| Turn On Delay Time | 6.7 ns |
| Family | GTL/TVC |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Prop. Delay@Nom-Sup | 6.5 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 80mA |
| Translation | GTL/P & LVTTL |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTL1655DGGRE4 Overview
Embedded in the TSSOP package, it is available for you to use.Packaged as Tape and Reel.A transmission line can be terminated with 64 terminations.Level translators is powered from a supply voltage of 3.3V.Level translators has 64 pins.The 64 pins are designed into it.The design of this electronic part is based on 16 bits.Level translators supports the maximal supply voltage of 3.6V.3V is its minimum supply voltage.This mount is done using the method of Surface Mount.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.This electronic device is categorized as a GTL/TVC electronic device.In order to achieve high efficiency, the supply voltage should be kept at 3.3V.Level translators is recommended that the operating temperature be higher than -40°C.Lower than 85°C is the recommended operating temperature.1 elements are present in it.Due to the 100mA output current, it provides maximum design flexibility.There is 160MHz frequency that can be achieved.
SN74GTL1655DGGRE4 Features
TSSOP package
64 pin count
64 pins
1 elements
SN74GTL1655DGGRE4 Applications
There are a lot of Texas Instruments SN74GTL1655DGGRE4 voltage translators & level shifters applications.
- Electronic Points of Sale
- Eliminate slow or noisy input signals
- Telecom
- Smartphone
- One Fabrication Site
- Debouncing a mechanical switch
- Temperature Ranges (1)
- Personal Electronics
- GPIO
- SDIO
