SN74GTL16612DLRG4
| Parameters | |
|---|---|
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTL & LVTTL |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TRANSLATES BETWEEN GTL LEVELS AND LVTTL OR 5V TTL LEVELS |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 95MHz |
| Pin Count | 56 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 120mA |
| Current - Output | 64mA |
| Number of Bits | 18 |
| Propagation Delay | 6.3 ns |
| Quiescent Current | 12μA |
| Turn On Delay Time | 7.4 ns |
| Family | GTL/TVC |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.064 A |
| Trigger Type | POSITIVE EDGE |
SN74GTL16612DLRG4 Overview
Level translators is embedded in the SSOP package.This package has the format of Tape and Reel.Usually, when a transmission line is terminated, there are 56 termination points used.The supply voltage of this device is 3.3V, and it is powered by it.With 56 pins, it is equipped with a minimal number of connections.The pin configuration of the device is 56.The design of this electronic part is based on 18 bits.Voltages above 5.25V are supported.In order for the machine to operate, the supply voltage must be 3.15V.Surface Mount is used for mounting.Level translators is part of Bus Driver/Transceivers.The logic IC it adopts is REGISTERED BUS TRANSCEIVER.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.In terms of electronic devices, this one is in the GTL/TVC family.Level translators consumes 12μA of quiescent current wLevel translatorshout being affected by external factors. Powered by a 3.35V battery, it can run for an extended period of time.Also, TRANSLATES BETWEEN GTL LEVELS AND LVTTL OR 5V TTL LEVELS characterize it.The operating temperature should be higher than -40°C.Ideally, the operating temperature should be lower than 85°C.This device has a total of 1 elements.The output current of 64mA makes it feature maximum design flexibility.The frequency that can be achieved is 95MHz.
SN74GTL16612DLRG4 Features
SSOP package
56 pin count
56 pins
3.35V power supplies
1 elements
SN74GTL16612DLRG4 Applications
There are a lot of Texas Instruments SN74GTL16612DLRG4 voltage translators & level shifters applications.
- GPIO
- Product Traceability
- I2C
- Desktop PC
- Telematics
- I2C / SMBus
- Temperature Ranges (1)
- One Assembly and Test Site
- Public Signage
- Motor Drives
