SN74GTL16616DLRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TRANSLATES BETWEEN GTL/GTL+ SIGNAL LEVELS AND LVTTL LOGIC LEVELS |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 95MHz |
| Pin Count | 56 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.15V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 120mA |
| Current - Output | 64mA |
| Number of Bits | 17 |
| Propagation Delay | 14.4 ns |
| Turn On Delay Time | 14.4 ns |
| Family | GTL/TVC |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.7 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 64mA |
| Low Level Output Current | 32mA |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 5mA |
| Translation | GTL & LVTTL |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTL16616DLRG4 Overview
Level translators is integrated into the SSOP package.The package is in the form of Tape and Reel.Transmission lines are terminated using 56 terminations.In order for it to operate, it needs to be powered by a voltage of 3.3V.With 56 pins, it is equipped with a minimal number of connections.Designed with 56 pins, it is compatible with a wide range of devices.There are 17 bits in this electronic part.Level translators supports a maximum supply voltage of 5.25V.This device requires a minimum voltage of 3.15V.Mounting this electronic component is done using the Surface Mount method.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.Despite the fact that it is an electronic device, it belongs to the GTL/TVC family.In order for Level translators to operate, level translators needs a power supply of 3.35V.There are also TRANSLATES BETWEEN GTL/GTL+ SIGNAL LEVELS AND LVTTL LOGIC LEVELS characteristics.A temperature of at least [0°C] should be used for the operation.Operating temperatures should be below 85°C.As far as this device is concerned, it contains 1 elements.The output current of 64mA makes it feature maximum design flexibility.Level shifter is possible to achieve a frequency of 95MHz.
SN74GTL16616DLRG4 Features
SSOP package
56 pin count
56 pins
3.35V power supplies
1 elements
SN74GTL16616DLRG4 Applications
There are a lot of Texas Instruments SN74GTL16616DLRG4 voltage translators & level shifters applications.
- Advanced Driver Assistance System (ADAS)
- Public Signage
- Product Traceability
- One Assembly
- Handset
- Enterprise and communications
- PMBus
- Infotainment Head Unit
- Extended Product-Change Notification
- General purpose I/O level shifting
