Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
64-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
64 |
Weight |
262.601633mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
Series |
74GTL |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
64 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
200MHz |
Base Part Number |
74GTL16622 |
Pin Count |
64 |
Output Type |
Tri-State, Non-Inverted |
Operating Supply Voltage |
3.3V |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Number of Circuits |
2 |
Max Supply Voltage |
3.45V |
Min Supply Voltage |
3.15V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
60mA |
Output Current |
50mA |
Number of Bits |
18 |
Propagation Delay |
5 ns |
Turn On Delay Time |
5.7 ns |
Logic Function |
Transceiver, Translator |
Output Characteristics |
3-STATE |
Logic IC Type |
REGISTERED BUS TRANSCEIVER |
Trigger Type |
POSITIVE EDGE |
Channel Type |
Bidirectional |
Control Type |
INDEPENDENT CONTROL |
Output Signal |
GTL |
Translator Type |
Mixed Signal |
Input Signal |
LVTTL |
Channels per Circuit |
9 |
Height |
1.2mm |
Length |
17mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74GTL16622ADGGR Overview
In the 64-TFSOP (0.240, 6.10mm Width) package, it is embedded.A package of Cut Tape (CT) has been used.Tri-State, Non-Inverted is the output configured for it.The translator type of this electrical device is Mixed Signal.Surface Mount is the way in which this electronic part is mounted.Electrical device with type Bidirectional channel.During operation, the temperature is set to -40°C~85°C TA.To achieve its exceptional flexibility, it relies on 2 circuits.There are 64 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Based on this base part number 74GTL16622, its related parts can be identified.A supply voltage of 3.3V is used to power the device.The device has a pin count of 64.Level translators belongs to the series 74GTL.The pin configuration of the device is 64.Electronic parts are designed with a number of bits of 18.The supply voltage is limited to 3.45V.In order for the machine to operate, the supply voltage must be 3.15V.Surface Mount is used for mounting.I would classify it as part of the group of Bus Driver/Transceivers.REGISTERED BUS TRANSCEIVER is the logic IC it uses.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.Based on its reliable performance, this device is suitable for TR.The output current of 50mA makes it feature maximum design flexibility.The supply voltage should be maintained at 3.3V for high efficiency.As far as this device is concerned, it contains 1 elements.There is 200MHz frequency that can be achieved.
SN74GTL16622ADGGR Features
64-TFSOP (0.240, 6.10mm Width) package
2 circuits
64 pin count
74GTL series
64 pins
1 elements
SN74GTL16622ADGGR Applications
There are a lot of Texas Instruments SN74GTL16622ADGGR voltage translators & level shifters applications.
- Telecom
- PMBus
- General purpose I/O level shifting
- I2C / SMBus
- Available in Military (-55°C to 125°C)
- Automotive
- Eliminate Slow or Noisy Input Signals
- Test Site
- Telematics
- Power-sensitive applications