SN74GTL2107PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74GTL |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Interface ICs |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 13 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74GTL2107 |
| Pin Count | 28 |
| Number of Outputs | 9 |
| Output Type | Open Drain |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 12 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 12mA |
| Output Current | 16mA |
| Number of Bits | 1 |
| Propagation Delay | 350 ns |
| Quiescent Current | 12mA |
| Turn On Delay Time | 205 ns |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Interface IC Type | GTL TO TTL TRANSCEIVER |
| High Level Output Current | -16mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 16mA |
| Output Signal | LVTTL, GTL |
| Translator Type | Mixed Signal |
| Input Signal | GTL, LVTTL |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTL2107PW Overview
There is an embedded version of it in package 28-TSSOP (0.173, 4.40mm Width).Level translators is packaged in the way of Tube.This output uses Open Drain.Level translators is the Mixed Signal type of translator that is used in this electrical device.Mounting this electronic component follows the Surface Mount method.This electrical device has a Channel type of Unidirectional.During operation, the temperature is set to -40°C~85°C TA.In order to achieve its superior flexibility, 1 circuits are used.Ending a transmission line involves 28 terminations.Level translators is possible to determine Level translatorss related parts using the base part number 74GTL2107.A supply voltage of 3.3V powers it.With 28 pins, it is equipped with a minimal number of connections.Level translators is a type of FPGA belonging to the 74GTL series.Level translators is designed wLevel translatorsh 28 pins.Level translators is designed wLevel translatorsh 1 bLevel translatorss.3.6V is the maximum supply voltage it can handle.A voltage of 3V is the minimum supply voltage required for it to operate.With the Surface Mount method, it is mounted.The number of channels is growing strong/weak: 12.Level translators belongs to the group of Other Interface ICs.There are no external factors that affect it, so it consumes 12mA quiescent current.This device features maximum design flexibility due to its output current of 16mA.The supply voltage should be maintained at 3.3V for high efficiency.Level translators is configured wLevel translatorsh 9 outputs.
SN74GTL2107PW Features
28-TSSOP (0.173, 4.40mm Width) package
1 circuits
28 pin count
74GTL series
28 pins
9 outputs
SN74GTL2107PW Applications
There are a lot of Texas Instruments SN74GTL2107PW voltage translators & level shifters applications.
- SMBus
- Eliminate Slow or Noisy Input Signals
- Extended Product Life Cycle
- Signaling Level Conversion for Clock or Data
- Handset
- Industrial equipment
- UART
- Extended Product-Change Notification
- Tablet
- Personal computers
