SN74GTLP1394DR
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 175MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74GTLP1394 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 3 |
| Nominal Supply Current | 20mA |
| Output Current | 100mA |
| Number of Bits | 2 |
| Propagation Delay | 4.8 ns |
| Turn On Delay Time | 8.6 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Channel Type | Bidirectional |
| Control Type | INDEPENDENT CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
SN74GTLP1394DR Overview
In the package 16-SOIC (0.154, 3.90mm Width), it can be found.This package has the format of Cut Tape (CT).Level translators is configured wlevel translatorsh an output of Tri-State, Inverted.Its translator type is Mixed Signal.This electronic part is mounted in the way of Surface Mount.This electrical device has channel type Bidirectional.Level translators operates at -40°C~85°C TA.1 circuits are used to achieve its superior flexibility.0 terminations are used to end transmission lines.A base part number 74GTLP1394 indicates the related parts.Level translators is powered from a supply voltage of 3.3V.A total of 16 pins are included.There are a number of devices in the 74GTLP series.With 16 pins, it is designed.An electronic part with 2 bits is designed.Supports a voltage of 3.45V as its maximum supply voltage.A minimal voltage of 3.15V is needed to operate it.The mount method is Surface Mount.2 channels are available.In Other Logic ICs, this part is included.The logic IC it adopts is BUS TRANSCEIVER.There are 3 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Based on its reliable performance, this device is suitable for TR.Because it features a 100mA output current, maximum design flexibility can be achieved.High efficiency requires a supply voltage of 3.3V.There can be only 175MHz frequency achieved.
SN74GTLP1394DR Features
16-SOIC (0.154, 3.90mm Width) package
1 circuits
16 pin count
74GTLP series
16 pins
SN74GTLP1394DR Applications
There are a lot of Texas Instruments SN74GTLP1394DR voltage translators & level shifters applications.
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Monitors
- Test Site
- Enterprise and communications
- Power-sensitive applications
- One Assembly and Test Site
- One Assembly
- Extended Product Life Cycle
- Wireless and Telecom Infrastructures
- Industrial equipment
