SN74GTLP1394PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74GTLP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 175MHz |
| Base Part Number | 74GTLP1394 |
| Pin Count | 16 |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Inverting, Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 3 |
| Nominal Supply Current | 20mA |
| Output Current | 100mA |
| Number of Bits | 2 |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 8.6 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 24mA |
| Control Type | INDEPENDENT CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLP1394PW Overview
In the package 16-TSSOP (0.173, 4.40mm Width), it can be found.Tube is the way in which it is packaged.Tri-State, Inverted is used for the output it is configured with.Its translator type is Mixed Signal.Electronic parts are mounted using the Surface Mount method.Bidirectional is the Channel type of this electrical device.Level translators operates at -40°C~85°C TA.Level translators achieves superior flexibilLevel translatorsy by using 1 circuLevel translatorss.There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.A base part number 74GTLP1394 indicates the related parts.Level translators is powered by a 3.3V supply.16 pins are present on this board.This device belongs to the 74GTLP series.The pin configuration of the device is 16.This electronic part is designed with 2 Bits.Supports a voltage of 3.45V as its maximum supply voltage.A voltage of 3.15V is the minimum supply voltage required for it to operate.With the Surface Mount method, it is mounted.The number of channels is growing strong/weak: 2.In Other Logic ICs, you will find this part.Logic ICs it uses are of the BUS TRANSCEIVER type.In transmission lines, there are 3 terminations, in which an impedance-matching device is used to end the line.The output current of 100mA gives it maximum flexibility in design.High efficiency requires a supply voltage of 3.3V.175MHz is the frequency at which this can be achieved.
SN74GTLP1394PW Features
16-TSSOP (0.173, 4.40mm Width) package
1 circuits
16 pin count
74GTLP series
16 pins
SN74GTLP1394PW Applications
There are a lot of Texas Instruments SN74GTLP1394PW voltage translators & level shifters applications.
- Product Traceability
- Printers and Other Peripherals
- Power-sensitive applications
- Extended Product-Change Notification
- I2C / SMBus
- Monitors
- Telecommunications
- Extended Product Life Cycle
- Available in Military (–55°C/125°C) Temperature Range
- Driving indicator LEDs or buzzers
