SN74GTLP1394PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 175MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 3 |
| Nominal Supply Current | 20mA |
| Current - Output | 100mA |
| Number of Bits | 2 |
| Propagation Delay | 4.8 ns |
| Turn On Delay Time | 8.6 ns |
| Family | GTLP |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTLP1394PWE4 Overview
There is an embedded version of it in package TSSOP.0 terminations are used to end transmission lines.A supply voltage of 3.3V is used to power the device.The device has a pin count of 16.Designed with 16 pins, it is compatible with a wide range of devices.An electronic part with 2 bits is designed.Voltages up to 3.45V can be supplied.3.15V is its minimum supply voltage.Surface Mount is used for mounting.Level translators belongs to the group of Other Logic ICs.BUS TRANSCEIVER is the logic IC it uses.3 terminations are possible, which each match the transmission line's characteristic impedance.This electronic device belongs to the family of GTLP.High efficiency requires maintaining the supply voltage at 3.3V.Level translators is recommended that the operating temperature be higher than -40°C.There should be a temperature below 85°C at which the system is operating.As far as this device is concerned, it contains 1 elements.The output current of 100mA makes it feature maximum design flexibility.Level shifter is possible to achieve 175MHz frequencies.
SN74GTLP1394PWE4 Features
TSSOP package
16 pin count
16 pins
1 elements
SN74GTLP1394PWE4 Applications
There are a lot of Texas Instruments SN74GTLP1394PWE4 voltage translators & level shifters applications.
- Routers (routing equipment)
- Debouncing a Mechanical Switch
- Driving Indicator LEDs or Buzzers
- Product Traceability
- Power-sensitive applications
- Wearable Health and Fitness Devices
- Infotainment Head Unit
- Product Traceability
- Desktop PC
- One Fabrication Site
