SN74GTLP1394PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 175MHz |
| Base Part Number | 74GTLP1394 |
| Pin Count | 16 |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 3 |
| Nominal Supply Current | 20mA |
| Output Current | 100mA |
| Number of Bits | 2 |
| Propagation Delay | 9 ns |
| Quiescent Current | 20mA |
| Turn On Delay Time | 8.6 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 100mA |
| Control Type | INDEPENDENT CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLP1394PWR Overview
There is an embedded version of it in package 16-TSSOP (0.173, 4.40mm Width).A Cut Tape (CT) package is used to package it.The output it is configured with uses Tri-State, Inverted.Translator type Mixed Signal is associated with this electrical device.Surface Mount is the way in which this electronic part is mounted.Bidirectional is the Channel type of this electrical device.The operating temperature is -40°C~85°C TA.Flexible 1 circuits enable it to achieve high performance.Transmission lines are terminated using 16 terminations.Based on this base part number 74GTLP1394, its related parts can be identified.A supply voltage of 3.3V powers it.There are 16 pins on it.Level translators is a type of FPGA belonging to the 74GTLP series.16 pins are used in its design.Level translators is designed wLevel translatorsh 2 bLevel translatorss.There is a maximum voltage of 3.45V supported.The minimal supply voltage is 3.15V.Mounting this electronic component is done using the Surface Mount method.Channel count is 2.As part of Other Logic ICs, this part is included.In this case, the logic IC is BUS TRANSCEIVER.Typically, 3 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.Level translators consumes 20mA of quiescent current wLevel translatorshout being affected by external factors. The reliability of this device indicates its suitability for TR as a result of its reliable performance.The output current of 100mA gives it maximum flexibility in design.For maximum efficiency, the supply voltage should be set to 3.3V.175MHz is the maximum frequency that can be achieved.
SN74GTLP1394PWR Features
16-TSSOP (0.173, 4.40mm Width) package
1 circuits
16 pin count
74GTLP series
16 pins
SN74GTLP1394PWR Applications
There are a lot of Texas Instruments SN74GTLP1394PWR voltage translators & level shifters applications.
- One Fabrication Site
- MDIO
- Data and Clock Transmission Over Backplane
- Available in Military (-55°C to 125°C)
- One Assembly and Test Site
- I2C
- Telecommunications
- I2C / SMBus
- PMBus
- Telecom
