SN74GTLP1395DGVR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74GTLP1395 |
| Pin Count | 20 |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 2 |
| Max Supply Voltage | 7V |
| Number of Ports | 2 |
| Output Current | 100mA |
| Number of Bits | 1 |
| Propagation Delay | 8.1 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Output Polarity | CONFIGURABLE |
| Logic IC Type | BUS TRANSCEIVER |
| Channel Type | Bidirectional |
| Control Type | INDEPENDENT CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74GTLP1395DGVR Overview
Level translators is embedded in the 20-TFSOP (0.173, 4.40mm Width) package.Packaged as Cut Tape (CT).Level translators uses Tri-State, Inverted as level translatorss output configuration.This electrical device has a translator type of Mixed Signal.Surface Mount is the way in which this electronic part is mounted.Level translators has the Channel type Bidirectional.Level translators operates at -40°C~85°C TA.Transmission lines can be terminated using 20 terminations to end them.Based on this base part number 74GTLP1395, its related parts can be identified.The supply voltage of this device is 3.3V, and it is powered by it.Level translators is equipped wLevel translatorsh 20 pin count.Level translators is a type of FPGA belonging to the 74GTLP series.The board has 20 pins.Electronic parts are designed with a number of bits of 1.Level translators supports a maximum supply voltage of 7V.Channel count is 2.Bus Driver/Transceivers contains this part.As for the logic IC it uses, it is a BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.The device's reliable performance makes it a good choice for TR.Due to the 100mA output current, it provides maximum design flexibility.High efficiency requires maintaining the supply voltage at 3.3V.
SN74GTLP1395DGVR Features
20-TFSOP (0.173, 4.40mm Width) package
20 pin count
74GTLP series
20 pins
SN74GTLP1395DGVR Applications
There are a lot of Texas Instruments SN74GTLP1395DGVR voltage translators & level shifters applications.
- Extended Product Life Cycle
- Extended Product-Change Notification
- Servers
- Enterprise and communications
- Controlled Baseline
- Available in Military (-55°C to 125°C)
- Data and Clock Transmission Over Backplane
- Debouncing a Mechanical Switch
- Automotive infotainment
- One Assembly
