SN74GTLP1395DWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74GTLP |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 74GTLP1395 |
| Pin Count | 20 |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 9.7 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Channel Type | Bidirectional |
| Control Type | INDEPENDENT CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 1 |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74GTLP1395DWE4 Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded.This package has the format of Tube.Level translators uses Tri-State, Inverted as the output.Its translator type is Mixed Signal.Surface Mount is the way in which this electronic part is mounted.In this electrical device, the Channel type is Bidirectional.During operation, the temperature is set to -40°C~85°C TA.0 terminations are used to end transmission lines.Based on this base part number 74GTLP1395, its related parts can be identified.Power comes from a voltage of 3.3V.The device has a pin count of 20.There is one device in the 74GTLP series, and it belongs to that series.In addition, it is designed with a pin number of 20.Electronic parts with 1 bits are designed for this application.3.45V is the maximum supply voltage it can handle.There is a minimum supply voltage of 3.15V for it.The way of mounting this electronic part is Surface Mount.2 is the number of channels.I would classify it as part of the group of Bus Driver/Transceivers.Level translators uses the logic IC BUS TRANSCEIVER.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.A high level of efficiency is achieved by maintaining the supply voltage at 3.3V.
SN74GTLP1395DWE4 Features
20-SOIC (0.295, 7.50mm Width) package
20 pin count
74GTLP series
20 pins
SN74GTLP1395DWE4 Applications
There are a lot of Texas Instruments SN74GTLP1395DWE4 voltage translators & level shifters applications.
- MDIO
- Product Traceability
- Wireless and Telecom Infrastructures
- Electronic Points of Sale
- Signaling Level Conversion for Clock or Data
- Debouncing a Mechanical Switch
- PMBus
- SDIO
- Public Signage
- Printers and Other Peripherals
