Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
Series |
74GTLP |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74GTLP1395 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State, Inverted |
Operating Supply Voltage |
3.3V |
Polarity |
Non-Inverting |
Number of Channels |
2 |
Max Supply Voltage |
3.45V |
Min Supply Voltage |
3.15V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
20mA |
Output Current |
100mA |
Number of Bits |
1 |
Propagation Delay |
8.1 ns |
Turn On Delay Time |
9.7 ns |
Logic Function |
Transceiver, Translator |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
Channel Type |
Bidirectional |
Control Type |
INDEPENDENT CONTROL |
Output Signal |
GTLP |
Translator Type |
Mixed Signal |
Input Signal |
LVTTL |
Channels per Circuit |
1 |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74GTLP1395DWR Overview
Package 20-SOIC (0.295, 7.50mm Width) includes it.Packaged in the way of Cut Tape (CT).Level translators uses Tri-State, Inverted as the output.Its translator type is Mixed Signal.Surface Mount is used to mount this electronic part.There is Bidirectional channel type for this electrical device.During operation, the temperature is set to -40°C~85°C TA.Ending a transmission line involves 20 terminations.The base part number 74GTLP1395 can be used to find its related parts.In order for it to operate, it needs to be powered by a voltage of 3.3V.Level translators has 20 pins.The device is part of the 74GTLP series.Level translators is designed wLevel translatorsh 20 pins.There are 1 bits in this electronic part.Level translators supports the maximal supply voltage of 3.45V.The minimal supply voltage is 3.15V.With the Surface Mount method, it is mounted.2 is the number of channels.As part of Bus Driver/Transceivers, it belongs.There is a logic IC BUS TRANSCEIVER used in the system.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.This device is well suited for TR based on its reliable performance.Due to the 100mA output current, it provides maximum design flexibility.The supply voltage should be maintained at 3.3V for high efficiency.
SN74GTLP1395DWR Features
20-SOIC (0.295, 7.50mm Width) package
20 pin count
74GTLP series
20 pins
SN74GTLP1395DWR Applications
There are a lot of Texas Instruments SN74GTLP1395DWR voltage translators & level shifters applications.
- Wearable Health and Fitness Devices
- Test Site
- One Assembly and Test Site
- Monitors
- Available in Military (-55°C to 125°C)
- Signaling Level Conversion for Clock or Data
- Power-sensitive applications
- UART
- Servers
- Automotive