SN74GTLP1395PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Current - Output | 100mA |
| Number of Bits | 2 |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 9.7 ns |
| Family | GTLP |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTLP & LVTTL |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTLP1395PWE4 Overview
Level translators is embedded in the TSSOP package.As part of the transmission line termination process, there are a total of 20 terminations.There is a voltage supply of 3.3V which powers the device.Level translators has 20 pins.The board has 20 pins.An electronic part with 2 bits is designed.Voltages above 3.45V are supported.The minimal voltage for operation is 3.15V.Mounting this electronic component is done using the Surface Mount method.I would classify it as part of the group of Bus Driver/Transceivers.Logic ICs it uses are of the BUS TRANSCEIVER type.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.Electronic devices like this belong to the family GTLP.TUBE is well suited to this device because of its reliability.Optimal efficiency requires 3.3V as the supply voltage.Temperatures above -40°C are recommended.Ideally, the operating temperature should be lower than 85°C.There are 1 elements in it.In addition to its maximum design flexibility, 100mA features the lowest output current.
SN74GTLP1395PWE4 Features
TSSOP package
20 pin count
20 pins
1 elements
SN74GTLP1395PWE4 Applications
There are a lot of Texas Instruments SN74GTLP1395PWE4 voltage translators & level shifters applications.
- Power-sensitive applications
- SDIO
- Automotive infotainment
- Driving indicator LEDs or buzzers
- Debouncing a mechanical switch
- Signaling Level Conversion for Clock or Data
- Eliminate Slow or Noisy Input Signals
- TVs
- Debouncing a Mechanical Switch
- Telematics
