SN74GTLP1395PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Current - Output | 100mA |
| Number of Bits | 2 |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 9.7 ns |
| Family | GTLP |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTLP & LVTTL |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTLP1395PWG4 Overview
Level translators is embedded in the TSSOP package.Usually, when a transmission line is terminated, there are 20 termination points used.The supply voltage of this device is 3.3V, and it is powered by it.There are 20 pins on this device.Designed with 20 pins, it is compatible with a wide range of devices.The design of this electronic part contains 2 bits.There is a maximum voltage of 3.45V supported.A voltage of 3.15V is the minimum supply voltage required for it to operate.The way of mounting this electronic part is Surface Mount.As part of Bus Driver/Transceivers, this part is included.As for the logic IC it uses, it is a BUS TRANSCEIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.This electronic device belongs to the family of GTLP.This device has been rated to be suitable for TUBE based upon the reliability of its performance.High efficiency requires a voltage supply of 3.3V.Level translators is recommended to operate at a temperature higher than -40°C.The operating temperature should be lower than 85°C.There are 1 elements in it.Due to the 100mA output current, it provides maximum design flexibility.
SN74GTLP1395PWG4 Features
TSSOP package
20 pin count
20 pins
1 elements
SN74GTLP1395PWG4 Applications
There are a lot of Texas Instruments SN74GTLP1395PWG4 voltage translators & level shifters applications.
- Enterprise and communications
- One Fabrication Site
- Products With Many I
- Controlled Baseline
- Eliminate Slow or Noisy Input Signals
- Personal computers
- Product Traceability
- Telecom
- Industrial
- Industrial equipment
