banner_page

SN74GTLP1395PWR

Surface Mount 20 pinsCut Tape (CT) 3.3V VVoltage Translators & Level Shifters Mixed Signal 20-TSSOP (0.173, 4.40mm Width) Active 6 Weeks Weeks1 (Unlimited)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74GTLP1395PWR
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 161
  • Description: Surface Mount 20 pinsCut Tape (CT) 3.3V VVoltage Translators & Level Shifters Mixed Signal 20-TSSOP (0.173, 4.40mm Width) Active 6 Weeks Weeks1 (Unlimited) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
Series 74GTLP
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Bus Driver/Transceivers
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74GTLP1395
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State, Inverted
Operating Supply Voltage 3.3V
Number of Channels 2
Max Supply Voltage 3.45V
Min Supply Voltage 3.15V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 20mA
Number of Bits 1
Propagation Delay 8.1 ns
Logic Function Transceiver, Translator
Output Characteristics 3-STATE
Output Polarity CONFIGURABLE
Logic IC Type BUS TRANSCEIVER
Channel Type Bidirectional
Control Type INDEPENDENT CONTROL
Output Signal GTLP
Translator Type Mixed Signal
Input Signal LVTTL
Channels per Circuit 1
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74GTLP1395PWR Overview


In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded.The package is in the form of Cut Tape (CT).Level translators is configured wlevel translatorsh an output of Tri-State, Inverted.Translator type Mixed Signal is associated with this electrical device.Surface Mount is used to mount this electronic part.This electrical device has a Channel type of Bidirectional.There is -40°C~85°C TA operating temperature.As part of the transmission line termination process, there are a total of 20 terminations.The base part number 74GTLP1395 can be used to find its related parts.Level translators is powered from a supply voltage of 3.3V.There are 20 pins on it.This device belongs to the 74GTLP series.The board has 20 pins.1 Bits are used in the design of this electronic part.Level translators supports a maximum supply voltage of 3.45V.The minimal voltage for operation is 3.15V.There are 2 channels.Level translators is part of Bus Driver/Transceivers.There is BUS TRANSCEIVER logic IC in it.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.This device has been rated to be suitable for TR based upon the reliability of its performance.The supply voltage should be maintained at 3.3V for high efficiency.

SN74GTLP1395PWR Features


20-TSSOP (0.173, 4.40mm Width) package
20 pin count
74GTLP series
20 pins

SN74GTLP1395PWR Applications


There are a lot of Texas Instruments SN74GTLP1395PWR voltage translators & level shifters applications.

  • Telecom
  • Available in Military (-55°C to 125°C)
  • Infotainment Head Unit
  • UART
  • Eliminate Slow or Noisy Input Signals
  • Data and Clock Transmission Over Backplane
  • Routers (Telecom Switching Equipment)
  • One Fabrication Site
  • SMBus
  • MDIO

Write a review

Note: HTML is not translated!
    Bad           Good