SN74GTLP2033DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74GTLP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.15V~3.45V |
| Terminal Pitch | 0.5mm |
| Frequency | 175MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74GTLP2033 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 40mA |
| Output Current | 100mA |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 8.8 ns |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | OPEN-DRAIN/3-STATE |
| Logic Type | LVTTL-TO-GTLP Adjustable-Edge-Rate Registered Transceiver |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 7.4 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTL/P & LVTTL |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLP2033DGGR Overview
A packaging method that uses Cut Tape (CT) is employed.The package 48-TFSOP (0.240, 6.10mm Width) includes it.The voltage of 3.15V~3.45V is supplied to make sure that the device is able to operate normally.A Surface Mount mounting method is used for mounting electronic parts.It is set to operate at -40°C~85°C.For storing information, the memory is equipped with 8 bits.Electronic parts belonging to the 74GTLP series share a number of characteristics.Using the base part number 74GTLP2033, it is possible to locate a number of related parts.The total number of pins on the component is 48.In 48 terminations, signals are prevented from reflecting off the end of the transmission line.Surface Mount is used for mounting.In its construction, there are 48 pins.In normal situations, the minimum supply voltage can be kept at 3.15V.If the maximum supply voltage is kept at 3.45V, normal use can be maintained.In order for it to operate, an adequate supply voltage of 3.3V is required.There are 2 ports on this device.A total of 1 elements make up the structure.Packing is done using TR.As its control type, INDEPENDENT CONTROL works.The frequency of the device is set to 175MHz.During operation, 100mA is provided as the output current.
SN74GTLP2033DGGR Features
SN74GTLP2033DGGR Applications
There are a lot of Texas Instruments SN74GTLP2033DGGR Specialty Logic ICs applications.
- Satellite ground stations and transmission stations
- Car alarm systems
- Precision engineering measurement
- Car radio
- Clock radio
- Notebook
- interconnection between switches
- interconnection between computers
- Fast Ethernet
- Shortwave receiver
