Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-VFBGA |
Number of Pins |
56 |
Weight |
58.796911mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74GTLP |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Number of Functions |
1 |
Supply Voltage |
3.15V~3.45V |
Terminal Pitch |
0.65mm |
Frequency |
175MHz |
Base Part Number |
74GTLP2034 |
Pin Count |
56 |
Polarity |
Non-Inverting |
Power Supplies |
3.3V |
Number of Circuits |
1 |
Max Supply Voltage |
3.45V |
Min Supply Voltage |
3.15V |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
8.6 ns |
Logic Function |
Transceiver |
Direction |
Bidirectional |
Output Characteristics |
OPEN-DRAIN/3-STATE |
Logic Type |
LVTTL-TO-GTLP Adjustable-Edge-Rate Registered Transceiver |
Trigger Type |
POSITIVE EDGE |
High Level Output Current |
-24mA |
Low Level Output Current |
100mA |
Control Type |
INDEPENDENT CONTROL |
Power Supply Current-Max (ICC) |
40mA |
Translation |
GTLP & LVTTL |
Length |
7mm |
Width |
4.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74GTLP2034GQLR Overview
A packaging method that uses Cut Tape (CT) is employed.There is a copy of it in the 56-VFBGA package.It is necessary to supply voltage 3.15V~3.45V to ensure that the device is capable of operating normally.The Surface Mount way is used to mount electronic parts.It is set to operate at -40°C~85°C.The memory features a size of 8 bits to store information.74GTLP series electronic parts share many similarities.By using its base part number 74GTLP2034, a number of related parts can be identified.The number of all component pins adds up to 56.56 terminations are designed to prevent signals from reflecting off the end of the transmission line.The way of Surface Mount is used to mount it.Its construction includes 56 pins.Keeping the minimum supply voltage at 3.15V can maintain normal operation.The maximum supply voltage of 3.45V is sufficient for normal use.For ease of use, it is recommended that the power supplies of 3.3V be maintained.It is equipped with 2 ports.Packing is handled by TAPE AND REEL.As its control type, INDEPENDENT CONTROL works.There is 175MHz frequency associated with it.A maximum power supply current of 40mA is maintained.1 circuits are configured on it.
SN74GTLP2034GQLR Features
SN74GTLP2034GQLR Applications
There are a lot of Texas Instruments SN74GTLP2034GQLR Specialty Logic ICs applications.
- Metro access rings
- Structural bonding
- Fiber distributed data interface (FDDI)
- Shortwave receiver
- Wireless communication
- Single to Multimode Fiber Conversion
- Radio transmission
- AV receiver
- Thermal management
- SONET/SDH Network