SN74GTLP21395DGVR
| Parameters | |
|---|---|
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLP |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74GTLP21395 |
| Pin Count | 20 |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 7V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Number of Channels | 2 |
| Number of Ports | 2 |
| Output Current | 100mA |
| Number of Bits | 1 |
| Propagation Delay | 8.8 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Output Polarity | CONFIGURABLE |
| Logic IC Type | BUS TRANSCEIVER |
| Channel Type | Bidirectional |
| Control Type | INDEPENDENT CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 1 |
| Length | 5mm |
SN74GTLP21395DGVR Overview
In the 20-TFSOP (0.173, 4.40mm Width) package, it is embedded.A Cut Tape (CT) package is used to package it.The output it is configured with uses Tri-State, Inverted.The translator type of this electrical device is Mixed Signal.Level translators is mounted according to the Surface Mount method.In this electrical device, the Channel type is Bidirectional.The temperature used for operation is -40°C~85°C TA.Usually, when a transmission line is terminated, there are 20 termination points used.Parts related to a base part number 74GTLP21395 are designated by the same number.Level translators is powered from a supply voltage of 3.3V.Level translators has 20 pins.This device belongs to the 74GTLP series.With 20 pins, it is designed.1 Bits are used in the design of this electronic part.Channel count is 2.Level translators is part of Bus Driver/Transceivers.In this case, the logic IC is BUS TRANSCEIVER.2 terminations are used as the methods of ending a transmission line with a device that matches the line's characteristic impedance.Powered by a 3.3V battery, it can run for an extended period of time.Based on its reliable performance, this device is suitable for TR.The output current of 100mA makes it feature maximum design flexibility.For maximum efficiency, the supply voltage should be set to 7V.
SN74GTLP21395DGVR Features
20-TFSOP (0.173, 4.40mm Width) package
20 pin count
74GTLP series
20 pins
3.3V power supplies
SN74GTLP21395DGVR Applications
There are a lot of Texas Instruments SN74GTLP21395DGVR voltage translators & level shifters applications.
- Temperature Ranges (1)
- Servers
- Infotainment Head Unit
- Power-sensitive applications
- Debouncing a mechanical switch
- Eliminate Slow or Noisy Input Signals
- One Assembly
- Routers (Telecom Switching Equipment)
- Eliminate slow or noisy input signals
- Monitors
