SN74GTLP21395PWE4
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74GTLP21395 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 2 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 8.8 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 100mA |
| Control Type | INDEPENDENT CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74GTLP |
SN74GTLP21395PWE4 Overview
In the package 20-TSSOP (0.173, 4.40mm Width), it can be found.Tube is the way it is packaged.The output it is configured with uses Tri-State, Inverted.The translator type of this electrical device is Mixed Signal.The electronic part is mounted in a way that corresponds to Surface Mount.Bidirectional is the Channel type of this electrical device.Level translators is -40°C~85°C TA at the operating temperature.There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The base part number 74GTLP21395 can be used to find its related parts.The supply voltage of this device is 3.3V, and it is powered by it.A total of 20 pins are included.There are a number of devices in the series 74GTLP that belong to it.Designed with 20 pins, it is compatible with a wide range of devices.The design of this electronic part contains 1 bits.The supply voltage is limited to 3.45V.Level translators operates wLevel translatorsh the minimal supply voltage of 3.15V.Channel count is 2.This part is included in Bus Driver/Transceivers.There is a logic IC BUS TRANSCEIVER used in the system.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.Powered by a 3.3V battery, it can run for an extended period of time.
SN74GTLP21395PWE4 Features
20-TSSOP (0.173, 4.40mm Width) package
20 pin count
74GTLP series
20 pins
3.3V power supplies
SN74GTLP21395PWE4 Applications
There are a lot of Texas Instruments SN74GTLP21395PWE4 voltage translators & level shifters applications.
- Extended Product Life Cycle
- SDIO
- LCD Panels Using GIP / GOA / ASG Technology
- UART
- Debouncing a mechanical switch
- Eliminate Slow or Noisy Input Signals
- Personal computers
- MDIO
- Wireless and Telecom Infrastructures
- One Fabrication Site
