SN74GTLP21395PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74GTLP21395 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Output Current | 100mA |
| Number of Bits | 1 |
| Propagation Delay | 10.4 ns |
| Turn On Delay Time | 10.4 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Channel Type | Bidirectional |
| Control Type | INDEPENDENT CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 1 |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLP21395PWR Overview
A package called 20-TSSOP (0.173, 4.40mm Width) contains it.This package has the format of Cut Tape (CT).Level translators is configured wlevel translatorsh an output of Tri-State, Inverted.This electrical device has a translator type of Mixed Signal.A Surface Mount mounting method has been used for this electronic part.Bidirectional is the type of channel for this electrical device.There is -40°C~85°C TA operating temperature.Transmission lines are terminated using 20 terminations.A base part number 74GTLP21395 indicates the related parts.A supply voltage of 3.3V powers it.A total of 20 pins are included.There are a number of devices in the series 74GTLP that belong to it.In addition, it is designed with a pin number of 20.Level translators is designed wLevel translatorsh 1 bLevel translatorss.Voltages up to 3.45V can be supplied.The minimal voltage for operation is 3.15V.The mount method is Surface Mount.Channel count is 2.As part of Bus Driver/Transceivers, it belongs.There is a logic IC BUS TRANSCEIVER used in the system.There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.In view of its reliable performance, this device can be considered suitable for TR.With an output current of 100mA, it offers maximum design flexibility.A high efficiency supply voltage should be maintained at 3.3V.
SN74GTLP21395PWR Features
20-TSSOP (0.173, 4.40mm Width) package
20 pin count
74GTLP series
20 pins
SN74GTLP21395PWR Applications
There are a lot of Texas Instruments SN74GTLP21395PWR voltage translators & level shifters applications.
- SMBus
- Enterprise and communications
- Personal Electronics
- Wearable Health and Fitness Devices
- Automotive
- Extended Product Life Cycle
- Data and Clock Transmission Over Backplane
- Telematics
- Debouncing a Mechanical Switch
- Monitors
