Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
48 |
Weight |
123.490523mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74GTLP |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
Additional Feature |
AO OUTPUTS HAVE EQUIVALENT 26-OHM SERIES RESISTORS |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.15V~3.45V |
Terminal Pitch |
0.4mm |
Base Part Number |
74GTLP22034 |
Pin Count |
48 |
Operating Supply Voltage |
3.45V |
Power Supplies |
3.3V |
Number of Ports |
2 |
Number of Bits |
8 |
Logic Function |
Transceiver |
Direction |
Bidirectional |
Output Characteristics |
OPEN-DRAIN/3-STATE |
Logic Type |
LVTTL-TO-GTLP Adjustable-Edge-Rate Registered Transceiver |
Output Polarity |
TRUE |
Max I(ol) |
0.1 A |
Prop. Delay@Nom-Sup |
7.1 ns |
Trigger Type |
POSITIVE EDGE |
Control Type |
INDEPENDENT CONTROL |
Power Supply Current-Max (ICC) |
40mA |
Translation |
GTLP & LVTTL |
Height Seated (Max) |
1.2mm |
Length |
9.7mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74GTLP22034DGVR Overview
Cut Tape (CT) is employed as a way of packaging.It is accessible to the 48-TFSOP (0.173, 4.40mm Width) package.It is essential that the device be able to operate normally by supplying a voltage of 3.15V~3.45V.The Surface Mount method of mounting electronic parts on a PCB is one of the most common methods.It operates at a temperature of -40°C~85°C.Approximately 8 bits of information can be stored in the memory.74GTLP series electronic parts share many similarities.Based on its base part number 74GTLP22034, related parts can be found.The total number of component pins equals 48.48 terminations are designed to prevent signals from reflecting off the end of the transmission line.Using Surface Mount, it is mounted.Its construction includes 48 pins.In order for it to operate, an adequate supply voltage of 3.45V is required.It is recommended that the power supplies for 3.3V be maintained for convenience.In terms of AO OUTPUTS HAVE EQUIVALENT 26-OHM SERIES RESISTORS, it provides high performance.The device contains 2 ports.For packing, it uses TAPE AND REEL.It uses INDEPENDENT CONTROL as a control type.40mA is the maximum current of the power supply.
SN74GTLP22034DGVR Features
SN74GTLP22034DGVR Applications
There are a lot of Texas Instruments SN74GTLP22034DGVR Specialty Logic ICs applications.
- Carrier phase observations
- Radio transmission
- Precision engineering measurement
- Wireless network systems
- Cordless telephone
- Indoor ad hoc meeting
- Bar, KTV wireless entertainment
- Satellite communication
- Wireless modems
- AV receiver