SN74GTLP22034GQLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74GTLP |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Additional Feature | AO OUTPUTS HAVE EQUIVALENT 26-OHM SERIES RESISTORS |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.15V~3.45V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74GTLP22034 |
| Pin Count | 56 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.6 ns |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | OPEN-DRAIN/3-STATE |
| Logic Type | LVTTL-TO-GTLP Adjustable-Edge-Rate Registered Transceiver |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | -12mA |
| Low Level Output Current | 100mA |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 40mA |
| Translation | GTLP & LVTTL |
| Length | 7mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74GTLP22034GQLR Overview
A packaging method based on Cut Tape (CT) is employed.A package called 56-VFBGA contains it.3.15V~3.45V is provided to ensure that the device works normally.Basically, it is an electronic part mounted with Surface Mount.Temperature -40°C~85°C is set as operating temperature.Approximately 8 bits of information can be stored in the memory.Electronic components in the 74GTLP series have many similarities.In addition to its base part number 74GTLP22034, other related parts are available.It adds up to 56 when all component pins are added together.Through 56 terminations, signals are prevented from reflecting off the end of transmission lines.Surface Mount is the way to mount it.For its construction, 56 pins are used.In normal conditions, the minimum voltage supply can be set to 3.15V.Keeping the maximum supply voltage at 3.45V will maintain normal operation.It is important to maintain the power supplies of 3.3V for ease of use.With AO OUTPUTS HAVE EQUIVALENT 26-OHM SERIES RESISTORS, it offers high performance.2 ports are present on it.It employs TAPE AND REEL for its packing.It uses INDEPENDENT CONTROL as a control type.40mA is the maximum power supply current.With 1 circuits, it is configured.
SN74GTLP22034GQLR Features
SN74GTLP22034GQLR Applications
There are a lot of Texas Instruments SN74GTLP22034GQLR Specialty Logic ICs applications.
- Switching system
- Vehicle, ship, aircraft navigation and positioning
- SONET/SDH Network
- Shortwave receiver
- AV receiver
- TV signal transmission
- Metro access rings
- VoIP phones
- Home theater wiring-free
- Wireless network systems
