SN74GTLP817DGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLP |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 175MHz |
| Base Part Number | 74GTLP817 |
| Pin Count | 24 |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 100mA |
| Output Current | 50mA |
| Number of Bits | 6 |
| Propagation Delay | 4.2 ns |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Channel Type | Bidirectional |
| Output Signal | LVTTL |
| Translator Type | Mixed Signal |
| Input Signal | GTLP |
| Channels per Circuit | 2, 6 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLP817DGVR Overview
Embedded in the 24-TFSOP (0.173, 4.40mm Width) package, it is available for you to use.The package is in the form of Cut Tape (CT).In its configuration, Tri-State, Inverted is used as the output.There is a translator type of Mixed Signal for this electrical device.This electronic part is mounted in the way of Surface Mount.A Bidirectional channel type is associated with this electrical device.There is -40°C~85°C TA operating temperature.Its superior flexibility is achieved by using 2 circuits.When it comes to terminating a transmission line, there are 24 terminations.A base part number 74GTLP817 indicates the related parts.The supply voltage of this device is 3.3V, and it is powered by it.The pin count of this device is 24.In terms of its design, it is a member of the 74GTLP series.24 pins are used in its design.The design of this electronic part contains 6 bits.The minimal supply voltage is 3.15V.Level translators has been mounted wLevel translatorsh the method of Surface Mount.There are no channels.The logic IC it adopts is BUS DRIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.The output current of 50mA makes it feature maximum design flexibility.A high level of efficiency is achieved by maintaining the supply voltage at 3.3V.In this case, the frequency is 175MHz.
SN74GTLP817DGVR Features
24-TFSOP (0.173, 4.40mm Width) package
2 circuits
24 pin count
74GTLP series
24 pins
SN74GTLP817DGVR Applications
There are a lot of Texas Instruments SN74GTLP817DGVR voltage translators & level shifters applications.
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- PMBus
- One Fabrication Site
- Desktop PC
- Public Signage
- One Assembly
- Handset
- Extended Product Life Cycle
- Data and Clock Transmission Over Backplane
- SDIO
