banner_page

SN74GTLP817PWE4

24 pins3.3V VVoltage Translators & Level Shifters TSSOP 1


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74GTLP817PWE4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 805
  • Description: 24 pins3.3V VVoltage Translators & Level Shifters TSSOP 1 (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 24
Weight 89.499445mg
JESD-609 Code e4
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1
Number of Terminations 24
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Frequency 175MHz
Pin Count 24
Operating Supply Voltage 3.3V
Temperature Grade INDUSTRIAL
Number of Channels 1
Max Supply Voltage 3.45V
Min Supply Voltage 3.15V
Number of Ports 2
Nominal Supply Current 10mA
Current - Output 50mA
Number of Bits 6
Propagation Delay 4.2 ns
Turn On Delay Time 6 ns
Family GTLP
Logic Function Translator
Output Characteristics 3-STATE
Output Polarity INVERTED
Logic IC Type BUS DRIVER
Length 7.8mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead

SN74GTLP817PWE4 Overview


In the package TSSOP, it can be found.To end a transmission line, there are 24 types of termination that can be used.There is a voltage supply of 3.3V which powers the device.There are 24 pins on it.The pin configuration of the device is 24.An electronic part with 6 bits is designed.The maximum supply voltage is 3.45V.Level translators operates wLevel translatorsh the minimal supply voltage of 3.15V.The mount method is Surface Mount.Channel count is 1.Logic ICs it uses are of the BUS DRIVER type.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.In the world of electronics, this electronic device belongs to the family of GTLP.Optimal efficiency requires 3.3V as the supply voltage.-40°C is the minimum operating temperature.Ideally, the operating temperature should be lower than 85°C.Due to its 50mA output current, this device offers maximum design flexibility.175MHz is the frequency at which this can be achieved.

SN74GTLP817PWE4 Features


TSSOP package
24 pin count
24 pins

SN74GTLP817PWE4 Applications


There are a lot of Texas Instruments SN74GTLP817PWE4 voltage translators & level shifters applications.

  • Push-pull level shifting (UART, SPI, JTAG, and so forth)
  • Personal Electronics
  • Power-sensitive applications
  • Eliminate slow or noisy input signals
  • Available in Military (-55°C to 125°C)
  • Industrial Equipment
  • GPIO
  • Extended Product-Change Notification
  • SMBus
  • PMBus

Write a review

Note: HTML is not translated!
    Bad           Good