SN74GTLP817PWR
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 175MHz |
| Base Part Number | 74GTLP817 |
| Pin Count | 24 |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 10mA |
| Output Current | 50mA |
| Number of Bits | 6 |
| Propagation Delay | 4.2 ns |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Channel Type | Bidirectional |
| Output Signal | LVTTL |
| Translator Type | Mixed Signal |
| Input Signal | GTLP |
| Channels per Circuit | 2, 6 |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
SN74GTLP817PWR Overview
There is an embedded version of it in package 24-TSSOP (0.173, 4.40mm Width).A package of Cut Tape (CT) has been used.Level translators uses Tri-State, Inverted as the output.Level translators is the Mixed Signal type of translator that is used in this electrical device.Surface Mount is the method used for mounting this electronic part.Level translators has the Channel type Bidirectional.The operating temperature is -40°C~85°C TA.Flexible 2 circuits enable it to achieve high performance.A transmission line can be terminated with 24 terminations.A base part number 74GTLP817 indicates the related parts.Power comes from a voltage of 3.3V.There are 24 pins on it.This device belongs to the 74GTLP series.There are 24 pins on it.An electronic part with 6 bits is designed.Supports a voltage of 3.45V as its maximum supply voltage.With a minimum supply voltage of 3.15V, it operates.Electronic parts are mounted using Surface Mount.There are 1 channels.A BUS DRIVER logic IC is used.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.As a result of its 50mA output current, it allows for maximum design flexibility.For maximum efficiency, the supply voltage should be set to 3.3V.There can be only 175MHz frequency achieved.
SN74GTLP817PWR Features
24-TSSOP (0.173, 4.40mm Width) package
2 circuits
24 pin count
74GTLP series
24 pins
SN74GTLP817PWR Applications
There are a lot of Texas Instruments SN74GTLP817PWR voltage translators & level shifters applications.
- Monitors
- Handset
- Extended Product-Change Notification
- Industrial equipment
- Controlled Baseline
- Eliminate Slow or Noisy Input Signals
- Controlled Baseline
- Telecommunications
- Routers (routing equipment)
- Automotive
