SN74GTLP817PWRG4
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Output Polarity | INVERTED |
| Logic IC Type | BUS DRIVER |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 175MHz |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 10mA |
| Current - Output | 50mA |
| Number of Bits | 6 |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 6 ns |
| Family | GTLP |
| Logic Function | Translator |
SN74GTLP817PWRG4 Overview
Level translators is integrated into the TSSOP package.The package is in the form of Tape & Reel (TR).There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The supply voltage of this device is 3.3V, and it is powered by it.The device has a pin count of 24.24 pins are used in its design.The design of this electronic part contains 6 bits.3.45V is the maximum supply voltage it can handle.3.15V is its minimum supply voltage.Level translators has been mounted wLevel translatorsh the method of Surface Mount.Channel count is 1.There is a logic IC BUS DRIVER used in the system.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.This electronic device is categorized as a GTLP electronic device.Optimal efficiency requires 3.3V as the supply voltage.-40°C is the minimum operating temperature.Ideally, the operating temperature should be lower than 85°C.In addition to its maximum design flexibility, 50mA features the lowest output current.175MHz is the frequency at which this can be achieved.
SN74GTLP817PWRG4 Features
TSSOP package
24 pin count
24 pins
SN74GTLP817PWRG4 Applications
There are a lot of Texas Instruments SN74GTLP817PWRG4 voltage translators & level shifters applications.
- Notebook
- Product Traceability
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Eliminate slow or noisy input signals
- One Fabrication Site
- Public Signage
- Product Traceability
- Automotive infotainment
- One Fabrication Site
- TVs
