SN74GTLPH1645DGGR
| Parameters | |
|---|---|
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 175MHz |
| Base Part Number | 74GTLPH1645 |
| Pin Count | 56 |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Operating Supply Current | 40mA |
| Number of Ports | 2 |
| Output Current | 100mA |
| Number of Bits | 16 |
| Propagation Delay | 9.4 ns |
| Turn On Delay Time | 9.4 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Channel Type | Bidirectional |
| Control Type | COMMON CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 8 |
SN74GTLPH1645DGGR Overview
Package 56-TFSOP (0.240, 6.10mm Width) includes it.Cut Tape (CT) is the way it is packaged.Tri-State, Non-Inverted is the output configured for it.This electrical device has a translator type of Mixed Signal.Surface Mount is used to mount this electronic part.In this electrical device, the Channel type is Bidirectional.A temperature of -40°C~85°C TA is used for operation.Due to its superior flexibility, it uses 2 circuits.Usually, when a transmission line is terminated, there are 56 termination points used.Parts that are related to 74GTLPH1645 can be identified based on its base part number.Level translators is powered by a 3.3V supply.Level translators is equipped wLevel translatorsh 56 pin count.The device is part of the 74GTLPH series.In addition, it is designed with a pin number of 56.The design of this electronic part contains 16 bits.The maximum supply voltage is 3.45V.A minimal voltage of 3.15V is needed to operate it.The mount method is Surface Mount.In Bus Driver/Transceivers, this part is included.As for the logic IC it uses, it is a BUS TRANSCEIVER.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.This device is well suited for TR based on its reliable performance.Due to the 100mA output current, it provides maximum design flexibility.High efficiency requires a supply voltage of 3.3V.The frequency that can be achieved is 175MHz.
SN74GTLPH1645DGGR Features
56-TFSOP (0.240, 6.10mm Width) package
2 circuits
56 pin count
74GTLPH series
56 pins
SN74GTLPH1645DGGR Applications
There are a lot of Texas Instruments SN74GTLPH1645DGGR voltage translators & level shifters applications.
- Controlled Baseline
- Driving indicator LEDs or buzzers
- General purpose I/O level shifting
- Personal computing
- Servers
- Tablet
- One Assembly
- Industrial equipment
- Extended Product Life Cycle
- Personal computers
