Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
56 |
Weight |
145.007811mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
Series |
74GTLPH |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.4mm |
Frequency |
175MHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74GTLPH1645 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State, Non-Inverted |
Operating Supply Voltage |
3.3V |
Number of Elements |
2 |
Polarity |
Non-Inverting |
Max Supply Voltage |
3.45V |
Min Supply Voltage |
3.15V |
Number of Ports |
2 |
Nominal Supply Current |
40mA |
Output Current |
100mA |
Number of Bits |
16 |
Propagation Delay |
9.4 ns |
Turn On Delay Time |
9.4 ns |
Logic Function |
Transceiver, Translator |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
Channel Type |
Bidirectional |
Control Type |
COMMON CONTROL |
Output Signal |
GTLP |
Translator Type |
Mixed Signal |
Input Signal |
LVTTL |
Channels per Circuit |
8 |
Height |
1.2mm |
Length |
11.3mm |
Width |
4.4mm |
Thickness |
1.05mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74GTLPH1645DGVR Overview
There is an embedded version of it in package 56-TFSOP (0.173, 4.40mm Width).Level translators is packaged in the way of Cut Tape (CT).The output it is configured with uses Tri-State, Non-Inverted.Translator type Mixed Signal is assigned to this electrical device.A Surface Mount mounting method has been used for this electronic part.Level translators has the Channel type Bidirectional.In the operating environment, the temperature is -40°C~85°C TA.Transmission lines are terminated using 56 terminations.Parts related to a base part number 74GTLPH1645 are designated by the same number.Power comes from a voltage of 3.3V.Pin count is 56.This is a device from the 74GTLPH series.Designed with 56 pins, it is compatible with a wide range of devices.An electronic part with 16 bits is designed.3.45V is the maximum voltage it supports.The minimal supply voltage is 3.15V.The way of mounting this electronic part is Surface Mount.This part is included in Bus Driver/Transceivers.BUS TRANSCEIVER is the logic IC it uses.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.The reliability of this device indicates its suitability for TR as a result of its reliable performance.Featuring a 100mA output current, its design flexibility is maximized.High efficiency requires a supply voltage of 3.3V.There are 2 elements in it.175MHz is the frequency at which this can be achieved.
SN74GTLPH1645DGVR Features
56-TFSOP (0.173, 4.40mm Width) package
56 pin count
74GTLPH series
56 pins
2 elements
SN74GTLPH1645DGVR Applications
There are a lot of Texas Instruments SN74GTLPH1645DGVR voltage translators & level shifters applications.
- Telematics
- Product Traceability
- Routers (routing equipment)
- Signaling Level Conversion for Clock or Data
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Debouncing a Mechanical Switch
- LCD Panels Using GIP / GOA / ASG Technology
- Automotive infotainment
- One Assembly and Test Site
- Controlled Baseline