SN74GTLPH1645GQLR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Surface Mount | YES |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Frequency | 175MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74GTLPH1645 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 40mA |
| Number of Bits | 16 |
| Propagation Delay | 5.8 ns |
| Turn On Delay Time | 9.4 ns |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.1 A |
| Channel Type | Bidirectional |
| Control Type | COMMON CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 8 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74GTLPH1645GQLR Overview
Level translators is embedded in the 56-VFBGA package.Cut Tape (CT) is the way it is packaged.In this configuration, the output is set to Tri-State, Non-Inverted.Translator type Mixed Signal is associated with this electrical device.This electronic part is mounted in the way of Surface Mount.This electrical device has a Channel type of Bidirectional.-40°C~85°C TA is the operating temperature.The superior flexibility of the system is achieved through its use of 2 circuits.As part of the transmission line termination process, there are a total of 56 terminations.Level translators is possible to determine Level translatorss related parts using the base part number 74GTLPH1645.The supply voltage of this device is 3.3V, and it is powered by it.Pin count is 56.There is one device in the 74GTLPH series, and it belongs to that series.The pin configuration of the device is 56.Electronic parts are designed with a number of bits of 16.Level translators supports the maximal supply voltage of 3.45V.There is a minimum supply voltage of 3.15V for it.This object belongs to the category of Bus Driver/Transceivers.A BUS TRANSCEIVER logic IC is used.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.A 3.3V power supply is required for it to operate.Considering its reliability, this device is appropriate for TAPE AND REEL.Level shifter is possible to achieve 175MHz frequencies.
SN74GTLPH1645GQLR Features
56-VFBGA package
2 circuits
56 pin count
74GTLPH series
56 pins
3.3V power supplies
SN74GTLPH1645GQLR Applications
There are a lot of Texas Instruments SN74GTLPH1645GQLR voltage translators & level shifters applications.
- Notebook
- I2C
- Wearable Health and Fitness Devices
- TVs
- Advanced Driver Assistance System (ADAS)
- Available in Military (-55°C to 125°C)
- Telecom
- Routers (routing equipment)
- One Assembly
- I2C / SMBus
