SN74GTLPH1655DGGR
| Parameters | |
|---|---|
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74GTLPH1655 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.45V |
| Number of Circuits | 16-Bit |
| Number of Ports | 2 |
| Nominal Supply Current | 40mA |
| Output Current | 100mA |
| Number of Bits | 16 |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 7.8 ns |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Transceiver |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 7.7 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTL/P & LVTTL |
| Height | 1.2mm |
| Length | 17mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 64 |
| Weight | 262.601633mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
SN74GTLPH1655DGGR Overview
Embedded in the 64-TFSOP (0.240, 6.10mm Width) package, it is used by many applications. Cut Tape (CT) is the way it is packaged. A 16-Bit-circuit is used to provide its superior flexibility. A Universal Bus Transceiver is the logic type of the electrical device that we are discussing. A Surface Mount-shaped electronic component is mounted here. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. The high/low output current of 24mA 24mA enables maximum design flexibility. A 74GTLPH series FPGA is a type of FPGA that is part of the family of FPGAs. The supply voltage is 3.15V~3.45V. 74GTLPH1655 family is the family in which it belongs. There is one type of termination that is called the 64 termination, which consists in terminating a transmission line with a device that has an impedance that matches the characteristic impedance of the line itself. When the supply voltage is above 3.3V, the device will operate normally. There are 64 pins on it. The electronic part was designed using 16 Bits. There are a number of termination types, including 2 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. It is mounted in the way of Surface Mount so that this electronic part can be seen. A 64-pin design is used. At this point, Vsup reaches its maximum value. There are 1 elements in it. There is a trigger configured with POSITIVE EDGE. Based on its reliable performance, this device is well suited for TR. A maximum amount of design flexibility can be achieved with 100mA due to its output current. An electrical part such as this one operates from a voltage of 3.3V as its supply voltage.
SN74GTLPH1655DGGR Features
64-TFSOP (0.240, 6.10mm Width) package
74GTLPH series
74GTLPH1655 family
64 pin count
64 pins
1 elements
SN74GTLPH1655DGGR Applications
There are a lot of Texas Instruments SN74GTLPH1655DGGR Universal Bus Functions applications.
- Small ground power station
- Safety thermostat
- Car
- Massager
- In-vehicle system
- Memory
- Calculator
- Digital camera
- Overcurrent/Short circuit protection
- Scanner
