SN74GTLPH16612DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES 5V SUPPLY |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74GTLPH16612 |
| Pin Count | 56 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.35V |
| Number of Channels | 18 |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 7.8 ns |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Universal Bus Transceiver |
| Max I(ol) | 0.064 A |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTL/P & LVTTL |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74GTLPH16612DLR Overview
The package 56-BSSOP (0.295, 7.50mm Width) includes it. Cut Tape (CT) is the way it is packaged. A 18-Bit circuit achieves its superior flexibility by using 18-Bit components. This electrical device has a logic type of Universal Bus Transceiver, which means that it is a logic device. The electronic part is mounted in Surface Mount-direction. Over -40°C~85°C, the operating temperature should be higher. High/Low output currents allow 32mA 64mA to have a maximum design flexibility. The 74GTLPH series contains this type of FPGA. Using 3.15V~3.45V as a supply voltage, it operates. It belongs to the 74GTLPH16612 family. There is one type of termination that is called the 56 termination, which consists in terminating a transmission line with a device that has an impedance that matches the characteristic impedance of the line itself. In order to maintain normal operation of the device, the supply voltage should remain above 3.3V. There are 56 pins on it. In order to design this electronic part, 18 Bits have been used. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is mounted in the way of Surface Mount so that this electronic part can be seen. 56 pins are used in the design of this board. 3.45V is the maximum supply voltage (Vsup). It operates from 3.35V power supplies. The element has 1 elements. POSITIVE EDGE is used with the trigger. The device's reliability makes it well suited for TAPE AND REEL. In addition to this, it is also characterized by ALSO REQUIRES 5V SUPPLY. 18 is growing/weakening in terms of channels.
SN74GTLPH16612DLR Features
56-BSSOP (0.295, 7.50mm Width) package
74GTLPH series
74GTLPH16612 family
56 pin count
56 pins
3.35V power supplies
1 elements
SN74GTLPH16612DLR Applications
There are a lot of Texas Instruments SN74GTLPH16612DLR Universal Bus Functions applications.
- Solar street light
- automatic temperature control circuits
- CMOS circuitry
- Illumination
- Induction cooker
- Printer IC
- Telecommunications
- Photovoltaic grid-connected power system
- Small and medium off-grid systems
- Flip flops
