SN74GTLPH16912GR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74GTLPH16912 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.45V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Nominal Supply Current | 50mA |
| Output Current | 50mA |
| Number of Bits | 18 |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Transceiver |
| Max I(ol) | 0.024 A |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTL/P & LVTTL |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLPH16912GR Overview
As part of the 56-TFSOP (0.240, 6.10mm Width) package, it is embedded. It is packaged in a way that resembles Cut Tape (CT). A 18-Bit-circuit is used to provide its superior flexibility. As far as the logic type of this electrical device is concerned, it is Universal Bus Transceiver. It is mounted in the way of Surface Mount so that this electronic part can be seen. A higher operating temperature than -40°C~85°C is recommended. In order to ensure maximum design flexibility, it features a High/Low output current of 24mA 24mA. The 74GTLPH series contains this type of FPGA. Using 3.15V~3.45V as a supply voltage, it operates. As it belongs to the 74GTLPH16912 family, it should be taken into consideration. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to maintain normal operation of the device, the supply voltage should remain above 3.3V. The 56 pin count is provided. With 18 Bits, you can design electronic parts in a very flexible way. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This electronic part is mounted in the way of Surface Mount. A 56-pin is used in this design. There is a maximum voltage supply (Vsup) reached when 3.45V is reached. It consists of 1 elements. It uses POSITIVE EDGE for its trigger. The reliable performance of this device makes it a good choice for TR. Because of its output current of 50mA, it offers maximum design flexibility. 3.3V is the supply voltage for this electrical part.
SN74GTLPH16912GR Features
56-TFSOP (0.240, 6.10mm Width) package
74GTLPH series
74GTLPH16912 family
56 pin count
56 pins
1 elements
SN74GTLPH16912GR Applications
There are a lot of Texas Instruments SN74GTLPH16912GR Universal Bus Functions applications.
- Push button switches
- Remote monitoring
- VCR
- Instrumentation Systems
- Television
- Data transfer
- Island protection
- Overcurrent/Short circuit protection
- Air conditioner
- Digital watch
