SN74GTLPH16927GR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74GTLPH16927 |
| Pin Count | 56 |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.45V |
| Power Supplies | 3.3V |
| Number of Channels | 18 |
| Number of Circuits | 1 |
| Number of Ports | 2 |
| Output Current | 50mA |
| Number of Bits | 18 |
| Propagation Delay | 6.5 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.05 A |
| Trigger Type | POSITIVE EDGE |
| Channel Type | Bidirectional |
| Control Type | COMMON CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLPH16927GR Overview
There is an embedded version of it in package 56-TFSOP (0.240, 6.10mm Width).Level translators is packaged in the way of Cut Tape (CT).In this configuration, the output is set to Tri-State, Non-Inverted.There is a translator type of Mixed Signal for this electrical device.Surface Mount is used to mount this electronic part.This electrical device has a Channel type of Bidirectional.During operation, the temperature is set to -40°C~85°C TA.The circuit's superior flexibility is achieved through the use of 1 circuits.Transmission lines are terminated using 56 terminations.Parts that are related to 74GTLPH16927 can be identified based on its base part number.Level translators is powered from a supply voltage of 3.3V.There are 56 pins on it.There are a number of devices in the series 74GTLPH that belong to it.Level translators has 56 pins.The design of this electronic part contains 18 bits.Level translators is 18 channels.I would classify it as part of the group of Bus Driver/Transceivers.Logic ICs it uses are of the REGISTERED BUS TRANSCEIVER type.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.This device runs on a 3.3V power supply.This device has been rated to be suitable for TAPE AND REEL based upon the reliability of its performance.Featuring a 50mA output current, its design flexibility is maximized.The supply voltage should be maintained at 3.45V for high efficiency.
SN74GTLPH16927GR Features
56-TFSOP (0.240, 6.10mm Width) package
1 circuits
56 pin count
74GTLPH series
56 pins
3.3V power supplies
SN74GTLPH16927GR Applications
There are a lot of Texas Instruments SN74GTLPH16927GR voltage translators & level shifters applications.
- TVs
- Available in Military (–55°C/125°C) Temperature Range
- One Assembly
- Extended Product-Change Notification
- Servers
- Debouncing a Mechanical Switch
- Industrial Equipment
- Handset
- Available in Military (-55°C to 125°C)
- One Fabrication Site
