SN74GTLPH16927KR
| Parameters | |
|---|---|
| Direction | Bidirectional |
| High Level Output Current | -24mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 50mA |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 18 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Supplier Device Package | 56-BGA MICROSTAR JUNIOR (7.0x4.5) |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | 74GTLPH16927 |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Channels | 18 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Bits | 18 |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 5.9 ns |
| Logic Function | Transceiver, Translator |
SN74GTLPH16927KR Overview
Embedded in the 56-VFBGA package, it is available for you to use.Cut Tape (CT) is the packaging method.Tri-State, Non-Inverted is used for the output it is configured with.There is Mixed Signal translator type for this electrical device.Surface Mount is the method used for mounting this electronic part.There is Bidirectional channel type for this electrical device.The temperature used for operation is -40°C~85°C TA.The superior flexibility of the system is achieved through its use of 1 circuits.A series of related parts can be determined from the base part number 74GTLPH16927.The device is a member of the 74GTLPH series.In addition, it is designed with a pin number of 56.There are 18 bits in this electronic part, which means it is designed in such a way.Supports a voltage of 3.45V as its maximum supply voltage.There is a minimum supply voltage of 3.15V for it.18 channels are available.A high efficiency supply voltage should be maintained at 3.3V.The operating temperature should be higher than -40°C.Lower than 85°C is the recommended operating temperature.
SN74GTLPH16927KR Features
56-VFBGA package
1 circuits
74GTLPH series
56 pins
SN74GTLPH16927KR Applications
There are a lot of Texas Instruments SN74GTLPH16927KR voltage translators & level shifters applications.
- Test Site
- One Fabrication Site
- Debouncing a Mechanical Switch
- Extended Product Life Cycle
- Industrial
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- I2C / SMBus
- LCD Panels Using GIP / GOA / ASG Technology
- Personal Electronics
- PMBus
