SN74GTLPH16927ZQLR
| Parameters | |
|---|---|
| Package / Case | 56-VFBGA |
| Surface Mount | YES |
| Number of Pins | 56 |
| Weight | 58.28662mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74GTLPH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74GTLPH16927 |
| Pin Count | 56 |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 18 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 6.5 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.05 A |
| Trigger Type | POSITIVE EDGE |
| Channel Type | Bidirectional |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 50mA |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Length | 7mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
SN74GTLPH16927ZQLR Overview
Level translators is integrated into the 56-VFBGA package.Tape & Reel (TR) is the way in which it is packaged.This output is configured with Tri-State, Non-Inverted.Translator type Mixed Signal is associated with this electrical device.Mounting this electronic component follows the Surface Mount method.A Bidirectional channel type is associated with this electrical device.Level translators operates at -40°C~85°C TA.1 circuits are used to achieve its superior flexibility.When it comes to terminating a transmission line, there are 56 terminations.Parts that are related to 74GTLPH16927 can be identified based on its base part number.The supply voltage of this device is 3.3V, and it is powered by it.Level translators is equipped wLevel translatorsh 56 pin count.Level translators is a type of FPGA belonging to the 74GTLPH series.The board has 56 pins.There are 18 bits in this electronic part.The supply voltage is limited to 3.45V.The minimal voltage for operation is 3.15V.18 is the number of channels available in the system.I would classify it as part of the group of Bus Driver/Transceivers.Logic ICs it uses are of the REGISTERED BUS TRANSCEIVER type.2 terminations are possible, which each match the transmission line's characteristic impedance.In view of its reliable performance, this device can be considered suitable for TAPE AND REEL.The supply voltage should be maintained at 3.3V for high efficiency.
SN74GTLPH16927ZQLR Features
56-VFBGA package
1 circuits
56 pin count
74GTLPH series
56 pins
SN74GTLPH16927ZQLR Applications
There are a lot of Texas Instruments SN74GTLPH16927ZQLR voltage translators & level shifters applications.
- Wireless and Telecom Infrastructures
- Automotive infotainment
- Handset
- MDIO
- Desktop PC
- Products With Many I
- SDIO
- Eliminate slow or noisy input signals
- One Fabrication Site
- UART
