SN74GTLPH16945VR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Additional Feature | WITH DIRECTION CONTROL |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 175MHz |
| Base Part Number | 74GTLPH16945 |
| Pin Count | 48 |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Output Current | 50mA |
| Number of Bits | 16 |
| Propagation Delay | 5.3 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.05 A |
| High Level Output Current | -24mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 50mA |
| Control Type | COMMON CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 8 |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLPH16945VR Overview
Package 48-TFSOP (0.173, 4.40mm Width) includes it.Packaged in the way of Cut Tape (CT).In its configuration, Tri-State, Non-Inverted is used as the output.Translator type Mixed Signal is assigned to this electrical device.Level translators is mounted according to the Surface Mount method.Bidirectional is the type of channel for this electrical device.The temperature used for operation is -40°C~85°C TA.2 circuits are used to provide this superior level of flexibility.There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.A series of related parts can be determined from the base part number 74GTLPH16945.There is a voltage supply of 3.3V which powers the device.With 48 pins, it is equipped with a minimal number of connections.This device belongs to the 74GTLPH series.Designed with 48 pins, it is compatible with a wide range of devices.The design of this electronic part contains 16 bits.Level translators supports a maximum supply voltage of 3.45V.3.15V is its minimum supply voltage.Level translators is part of Bus Driver/Transceivers.Level translators uses the logic IC BUS TRANSCEIVER.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.The reliability of this device indicates its suitability for TAPE AND REEL as a result of its reliable performance.Due to the 50mA output current, it provides maximum design flexibility.High efficiency requires maintaining the supply voltage at 3.3V.Also, WITH DIRECTION CONTROL characterize it.Level shifter is possible to achieve a frequency of 175MHz.
SN74GTLPH16945VR Features
48-TFSOP (0.173, 4.40mm Width) package
2 circuits
48 pin count
74GTLPH series
48 pins
SN74GTLPH16945VR Applications
There are a lot of Texas Instruments SN74GTLPH16945VR voltage translators & level shifters applications.
- Extended Product Life Cycle
- Product Traceability
- One Assembly and Test Site
- I2C / SMBus
- SMBus
- Controlled Baseline
- Signaling Level Conversion for Clock or Data
- Infotainment Head Unit
- Available in Military (–55°C/125°C) Temperature Range
- Extended Product Life Cycle
