Parameters |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Frequency |
175MHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74GTLPH306 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State, Non-Inverted |
Operating Supply Voltage |
3.3V |
Number of Circuits |
1 |
Max Supply Voltage |
3.45V |
Min Supply Voltage |
3.15V |
Number of Ports |
2 |
Nominal Supply Current |
20mA |
Output Current |
50mA |
Number of Bits |
8 |
Propagation Delay |
7.5 ns |
Logic Function |
Transceiver, Translator |
Output Characteristics |
3-STATE |
Output Polarity |
TRUE |
Logic IC Type |
BUS TRANSCEIVER |
Channel Type |
Bidirectional |
Control Type |
COMMON CONTROL |
Output Signal |
GTLP |
Translator Type |
Mixed Signal |
Input Signal |
LVTTL |
Channels per Circuit |
8 |
Height |
2.65mm |
Length |
15.4mm |
Width |
7.5mm |
Thickness |
2.35mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
24 |
Weight |
624.398247mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
Series |
74GTLPH |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
SN74GTLPH306DWR Overview
In the package 24-SOIC (0.295, 7.50mm Width), it can be found.Cut Tape (CT) is the packaging method.In its configuration, Tri-State, Non-Inverted is used as the output.Translator type Mixed Signal is assigned to this electrical device.The electronic part is mounted using the Surface Mount method.The Channel type of this electrical device is Bidirectional.-40°C~85°C TA is the operating temperature.1 circuits are used to achieve its superior flexibility.As part of the transmission line termination process, there are a total of 24 terminations.There is a base part number 74GTLPH306 that refers to the related parts.A supply voltage of 3.3V powers it.Level translators is equipped wLevel translatorsh 24 pin count.The device is part of the 74GTLPH series.The board has 24 pins.Electronic parts are designed with a number of bits of 8.Level translators supports a maximum supply voltage of 3.45V.Level translators operates wLevel translatorsh the minimal supply voltage of 3.15V.This part is included in Bus Driver/Transceivers.As for the logic IC it uses, it is a BUS TRANSCEIVER.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.In view of its reliable performance, this device can be considered suitable for TR.With an output current of 50mA, it offers maximum design flexibility.A high efficiency supply voltage should be maintained at 3.3V.The frequency that can be achieved is 175MHz.
SN74GTLPH306DWR Features
24-SOIC (0.295, 7.50mm Width) package
1 circuits
24 pin count
74GTLPH series
24 pins
SN74GTLPH306DWR Applications
There are a lot of Texas Instruments SN74GTLPH306DWR voltage translators & level shifters applications.
- Extended Product-Change Notification
- I2C / SMBus
- Product Traceability
- Public Signage
- Wireless and Telecom Infrastructures
- Monitors
- Personal Electronics
- Tablet
- Debouncing a Mechanical Switch
- Handset