SN74GTLPH306DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 175MHz |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Current - Output | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 8 ns |
| Family | GTLP |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.05 A |
| Control Type | COMMON CONTROL |
| Translation | GTL/P & LVTTL |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTLPH306DWRE4 Overview
In the package SOIC, it can be found.Level translators is packaged in the way of Tape & Reel (TR).Transmission lines are terminated using 24 terminations.The supply voltage of this device is 3.3V, and it is powered by it.The pin count of this device is 24.24 pins are used in its design.8 Bits are used in the design of this electronic part.Voltages up to 3.45V can be supplied.The minimal supply voltage is 3.15V.Electronic parts are mounted using Surface Mount.There are a total of 1 channels.This object belongs to the category of Bus Driver/Transceivers.Logic ICs it uses are of the BUS TRANSCEIVER type.2 terminations are used as the methods of ending a transmission line with a device that matches the line's characteristic impedance.Level translators is part of the family of electronic devices called GTLP.TAPE AND REEL is well suited to this device because of its reliability.High efficiency requires maintaining the supply voltage at 3.3V.Level translators is recommended to operate at a temperature higher than -40°C.The operating temperature should be lower than 85°C.Due to the 50mA output current, it provides maximum design flexibility.Frequency 175MHz can be achieved.
SN74GTLPH306DWRE4 Features
SOIC package
24 pin count
24 pins
SN74GTLPH306DWRE4 Applications
There are a lot of Texas Instruments SN74GTLPH306DWRE4 voltage translators & level shifters applications.
- I2C / SMBus
- Advanced Driver Assistance System (ADAS)
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Smartphone
- TVs
- Notebook
- Telecom
- Personal computing
- Infotainment Head Unit
- Product Traceability
