banner_page

SN74GTLPH306DWRG4

24 pinsTape & Reel (TR) 3.3V VVoltage Translators & Level Shifters SOIC 1


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74GTLPH306DWRG4
  • Package: SOIC
  • Datasheet: -
  • Stock: 594
  • Description: 24 pinsTape & Reel (TR) 3.3V VVoltage Translators & Level Shifters SOIC 1 (Kg)

Details

Tags

Parameters
Turn On Delay Time 7.5 ns
Family GTLP
Logic Function Transceiver, Translator
Direction Bidirectional
Output Characteristics 3-STATE
Logic IC Type BUS TRANSCEIVER
Max I(ol) 0.05 A
Control Type COMMON CONTROL
Translation GTL/P & LVTTL
Height Seated (Max) 2.65mm
Width 7.5mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount
Package / Case SOIC
Number of Pins 24
Weight 624.398247mg
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1
Number of Terminations 24
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Frequency 175MHz
Pin Count 24
Operating Supply Voltage 3.3V
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Number of Channels 1
Max Supply Voltage 3.45V
Min Supply Voltage 3.15V
Number of Ports 2
Nominal Supply Current 20mA
Current - Output 50mA
Number of Bits 8
Propagation Delay 7.5 ns

SN74GTLPH306DWRG4 Overview


Level translators is integrated into the SOIC package.Tape & Reel (TR) is the packaging method.When it comes to terminating a transmission line, there are 24 terminations.Level translators is powered by a 3.3V supply.There are 24 pins on this device.24 pins are used in its design.There are 8 bits in this electronic part, which means it is designed in such a way.Supports a voltage of 3.45V as its maximum supply voltage.There is a minimum supply voltage of 3.15V for it.Using the method of Surface Mount, this electronic component is mounted.Channel count is 1.In Bus Driver/Transceivers, this part is included.As for the logic IC it uses, it is a BUS TRANSCEIVER.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.This electronic device belongs to the family of GTLP.Considering its reliability, this device is appropriate for TAPE AND REEL.If the supply voltage is kept at 3.3V, a high level of efficiency can be achieved.In order for the system to operate properly, the operating temperature should be higher than -40°C.There should be a temperature below 85°C at which the system is operating.In addition to its maximum design flexibility, 50mA features the lowest output current.In this case, the frequency is 175MHz.

SN74GTLPH306DWRG4 Features


SOIC package
24 pin count
24 pins

SN74GTLPH306DWRG4 Applications


There are a lot of Texas Instruments SN74GTLPH306DWRG4 voltage translators & level shifters applications.

  • Enterprise and communications
  • Signaling Level Conversion for Clock or Data
  • PMBus
  • Motor Drives
  • Automotive
  • Debouncing a mechanical switch
  • Eliminate Slow or Noisy Input Signals
  • One Assembly and Test Site
  • Controlled Baseline
  • Monitors

Write a review

Note: HTML is not translated!
    Bad           Good