Parameters |
Polarity |
Non-Inverting |
Max Supply Voltage |
3.45V |
Min Supply Voltage |
3.15V |
Number of Ports |
2 |
Nominal Supply Current |
20mA |
Output Current |
50mA |
Number of Bits |
8 |
Propagation Delay |
7.5 ns |
Turn On Delay Time |
8 ns |
Logic Function |
Transceiver, Translator |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
Channel Type |
Bidirectional |
Control Type |
COMMON CONTROL |
Output Signal |
GTLP |
Translator Type |
Mixed Signal |
Input Signal |
LVTTL |
Channels per Circuit |
8 |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Series |
74GTLPH |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Termination |
SMD/SMT |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Frequency |
175MHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74GTLPH306 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State, Non-Inverted |
Operating Supply Voltage |
3.3V |
Number of Elements |
1 |
SN74GTLPH306PW Overview
The 24-TSSOP (0.173, 4.40mm Width) package contains it.Packaged in the way of Tube.This output is configured with Tri-State, Non-Inverted.Its translator type is Mixed Signal.The electronic part is mounted in a way that corresponds to Surface Mount.Bidirectional is the Channel type of this electrical device.-40°C~85°C TA is the operating temperature.There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Parts that are related to 74GTLPH306 can be identified based on its base part number.This device is powered by a supply voltage of 3.3V which is applied to it.The pin count of this device is 24.Level translators belongs to the series 74GTLPH.Level translators is designed wLevel translatorsh 24 pins.Electronic parts are designed with a number of bits of 8.The supply voltage is limited to 3.45V.The minimal supply voltage is 3.15V.Level translators has been mounted wLevel translatorsh the method of Surface Mount.This part is included in Bus Driver/Transceivers.A BUS TRANSCEIVER logic IC is used.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.As a result of its 50mA output current, it allows for maximum design flexibility.For maximum efficiency, the supply voltage should be set to 3.3V.As far as this device is concerned, it contains 1 elements.There is 175MHz frequency that can be achieved.
SN74GTLPH306PW Features
24-TSSOP (0.173, 4.40mm Width) package
24 pin count
74GTLPH series
24 pins
1 elements
SN74GTLPH306PW Applications
There are a lot of Texas Instruments SN74GTLPH306PW voltage translators & level shifters applications.
- Controlled Baseline
- Power-sensitive applications
- Test Site
- Wireless and Telecom Infrastructures
- Automotive infotainment
- Product Traceability
- LCD Panels Using GIP / GOA / ASG Technology
- Routers (Telecom Switching Equipment)
- Automotive
- Extended Product Life Cycle