SN74GTLPH306PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 175MHz |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Current - Output | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 8 ns |
| Family | GTLP |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.05 A |
| Control Type | COMMON CONTROL |
| Translation | GTL/P & LVTTL |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTLPH306PWE4 Overview
There is an embedded version of it in package TSSOP.As part of the transmission line termination process, there are a total of 24 terminations.In order to power the device, a voltage supply of 3.3V is required.The pin count of this device is 24.There are 24 pins on it.There are 8 bits in this electronic part.The supply voltage is limited to 3.45V.In order for the machine to operate, the supply voltage must be 3.15V.This mount is done using the method of Surface Mount.1 channels are available.This object belongs to the category of Bus Driver/Transceivers.There is a logic IC BUS TRANSCEIVER used in the system.2 terminations are possible, which each match the transmission line's characteristic impedance.This electronic device belongs to the family of GTLP.This device has been rated to be suitable for TUBE based upon the reliability of its performance.Optimal efficiency requires 3.3V as the supply voltage.The operating temperature should be higher than -40°C.Operating temperatures should be below 85°C.This device features maximum design flexibility due to its output current of 50mA.There can be only 175MHz frequency achieved.
SN74GTLPH306PWE4 Features
TSSOP package
24 pin count
24 pins
SN74GTLPH306PWE4 Applications
There are a lot of Texas Instruments SN74GTLPH306PWE4 voltage translators & level shifters applications.
- Driving Indicator LEDs or Buzzers
- Eliminate Slow or Noisy Input Signals
- Telecommunications
- Desktop PC
- Telecom
- Personal Electronics
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Extended Product Life Cycle
- Controlled Baseline
- Handset
