SN74GTLPH306PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 175MHz |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Current - Output | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 8 ns |
| Family | GTLP |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.05 A |
| Control Type | COMMON CONTROL |
| Translation | GTL/P & LVTTL |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTLPH306PWG4 Overview
TSSOP contains it.As part of the transmission line termination process, there are a total of 24 terminations.Level translators is powered from a supply voltage of 3.3V.Level translators is equipped wLevel translatorsh 24 pin count.With 24 pins, it is designed.The design of this electronic part is based on 8 bits.3.45V is the maximum voltage it supports.The minimal voltage for operation is 3.15V.With the Surface Mount method, it is mounted.1 channels are available.I would classify it as part of the group of Bus Driver/Transceivers.As for the logic IC it uses, it is a BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.GTLP is the family of this electronic device.As a result of its reliable performance, it is well suited for TUBE.Optimal efficiency requires 3.3V as the supply voltage.If the operating temperature is less than -40°C, then the system should not operate.Ideally, the operating temperature should be lower than 85°C.This device features maximum design flexibility due to its output current of 50mA.175MHz is the frequency at which this can be achieved.
SN74GTLPH306PWG4 Features
TSSOP package
24 pin count
24 pins
SN74GTLPH306PWG4 Applications
There are a lot of Texas Instruments SN74GTLPH306PWG4 voltage translators & level shifters applications.
- PMBus
- Extended Product-Change Notification
- Telecommunications
- Controlled Baseline
- Monitors
- Industrial
- Driving Indicator LEDs or Buzzers
- Extended Product-Change Notification
- Notebook
- Automotive
